On the plastic tarp covers a five-step method of thatch

 Plastic tarp thatch cover methods for the use of a plastic tarp is very critical, responsible officer must have enough attention, here we went about the next.
  1, plastic tarp positive (waist rope outward) vertical thatch cover, back side of the rope at the site.
  2, the angle rope tied: the plastic tarp each two angles at each end of the rope taut, respectively, to the outside corner of the plastic tarp expanded into triangle shape. Cloth folded corners on both sides of the truck flattened end wall, tight corners at both ends of the vehicle, through the pressure of the rope, hand hook or hand brake lever inside, was X-type tension were tied at both ends of the T-rail vehicles.
  3, waist, side rope tied: the middle of the vehicle has a T-shaped iron, plastic tarp in the middle of the waist, side ropes were tied to the vehicle in the middle of the T-iron; intermediate vehicle without T-iron, plastic tarp in the middle of the waist, side ropes were tied in the middle of the vehicle near the T-iron.Other waist, side ropes, starting from the ends of the vehicle, toward the middle of the vehicle, the order of T-iron on the appropriate bundle.
  4, the end of the rope tied: Plastic tarp two ends of each side of the rope should be taut shut up, hook or hand through the hand brake lever, respectively, in both the vertical bundle ends of the T-rail vehicles.
  5, the pressure rope tied: plastic tarpaulin rope at each end of the press should suppress plastic tarp corners taut, the plastic tarp close to the vehicle side wall were tied on the side of the T-rail vehicles.
  Safe use of plastic tarp is very important, we will be able to grasp the method thatch cover better do our job.